81.6 F
Fort Smith
Friday, July 3, 2026
Home Blog Page 659

Ethanol Nightmares in Fishing Boats

By Jason Sealock
Original article was first published on Wired2fish.com on January 9, 2012

Sputtering. Spitting. Choking. No Power. The motor refused to muster up the strength to get the 20-foot bass boat up on plane. It was more like a tow boat dingy than a bass fishing machine. The angler was confused. He’d been meticulous about care for the engine and the boat.

The boat raced down the lake. The gentle breeze made for the perfect bow lift and the boat was roaring at full tilt on the way to the first stop during practice for the Central Open on Lake Lewisville. In a split second the boat lurched and started pushing water in less than 50 yards. It was like the lower unit was thrown but the boat could still get on pad although barely able to touch 3,500 RPM.

Sound like an old boat and old motor? Well it wasn’t the condition of the motor or boat at all that caused these woes. It was the well maintained boat and motor of Bassmaster Central Open pro Jason Baggett of Mansfield, Ark. The little gremlin in the outboard was a relatively misunderstood culprit called ethanol.

When we reported about the new E-15 gas laws coming down the pipe last January, we were anticipating more problems for fishing boat owners. Ethanol is not your friend if you own a fishing boat or pretty much anything that consumes gas that was not an automobile made in the last 7 years. The subsidized fuel alternative can and will wreak havoc in your bass fishing machine if you let it.

Baggett is a testament to that fact, having just picked his boat up out of the shop for more than $1,500 of damage and repairs completely caused by ethanol and its effects on fuel filters, spark plugs, fuel lines and more. Baggett fished the Central Open circuit in 2011 but was plagued by what he thought was fuel filter problems.

It finally came to a head when fishing on Lake Tenkiller on a fun trip on Black Friday, ironically enough.  The boat was sluggish, running rough and just pushed water refusing to get on plane. He pulled the boat out of the lake and headed straight for Brad’s Boat Sales in Alma, Ark. He worked with Robert Sampley, the chief mechanic on the issues and discovered that ethanol and the deposits it was creating had wreaked havoc on his fuel filters, fuel lines, spark plugs, fuel pumps and more.

Sampley has 33 years of experience and is 5-Star Yamaha and Mercruiser/Outboard certified and has seen a growing number of ethanol related issues coming into the shop.

What is Ethanol Blended Fuel

Manufacturers generate ethanol, which is short for ethyl alcohol, by fermenting and distilling crops like corn, wheat and barley. It’s the same stuff that is in alcoholic beverages. Alcohol is an amazing cleaner and solvent and its natural tendency is to bond with water. There is where the problems lie. Unlike automobiles, boats don’t go through gas as quickly. Where a car might fill up every week, boats often sit for weeks on end with the same gas in them.

What happens is a process called phase separation where the alcohol separates from the gas and alcohol bonds to any water that is inherent in the system, corrupting all of the fuel in the process. That is the second problem with boats as opposed to cars with ethanol. Boats live in a watery environment. There is a lot more water present all the time. Once a fuel tank has reached phase separation, there is no fixing it. The fuel really needs to be discarded.

The other issue besides the water is that because alcohol is such a good solvent and cleaner it can dry out, damage and corrode plastics, rubbers and cause pieces to flake, break off and travel into the fuel system of an outboard.

In Baggett’s case that’s what happened. He was unknowingly putting ethanol fuel that was at a much higher content than is supposed to be allowed into his boat and his boat was sitting for extended periods of time allowing for breakdown of fuel lines, filters, and other components that were creating deposits in other parts of the system.

As seen in the photos here. You can see fuel lines that were cut open and inspected to find the inner walls were deteriorating and flaking off into the fuel. The fuel lines themselves became very hard and brittle. The fuel filters got gummed up with debris which also lead to fouling of spark plugs. The fuel filters swelled and broke into two pieces. Spark plug injectors filled with gunk and failed to spark.

“I’m embarrassed that I let this happen,” Baggett said. “I honestly didn’t know that there was ethanol in the system and that it was doing this to my outboard.”

Some early warning signs that you might have a fuel system problem are constantly dirty and clogged fuel filters, sputtering and choking of the outboard, lack of power, premature rusting of parts, gunk and build up in the system and complete shutdown of fuel intake.

But the blame doesn’t necessarily lie solely with Baggett. Retail locations have been found to be unknowing victims of ethanol in their own gas, especially those supposedly with less than 10 percent ethanol. Stations using gas with less than 10 percent ethanol aren’t mandated to put up signs to that effect either. Sampley has tested fuels in boats at more than 24 percent ethanol levels who purchased gas from stations with no ethanol signage whatsoever. You can purchase ethanol content testers to perform these tests on your own fuels if you have concerns.

Basically you’ll follow the instructions and place 25% or 50% water in the tube with graduations on it and then add your fuel sample, shake to mix and then wait was the ethanol will bond to the water. Then by performing simple calculations, you determine the actual amount of ethanol in the system.

Ethanol Precautions

Sampley and Baggett offered several suggestions on how to avoid these ethanol nightmares in your own fishing boats.

“If I could save one angler from going through everything I’ve been through in the last year, it would be well worth the time,” Baggett said.

The first and easiest fix can be to avoid ethanol fuels all together in marine outboards. Seek out those stations that adamantly announced and promote they use non-ethanol based fuels only. Avoiding the root cause of the problems is obviously the best solution in any case. Test the fuel if you’re concerned. Some stations may unknowingly be carrying ethanol fuels.

Another precaution is to use a fuel and ethanol stabilizer like Lucas Safeguard Ethanol Fuel Conditioner with Stabilizers. This product will stabilize the ethanol to a degree in your system until you can burn through it all. Gas has a shelf life of about 3 weeks. After that, octane begins to diminish. These stabilizing agents can prolong that. However they cannot change the nature of ethanol, and its natural tendency to bond to water.

Buy gas from busy gas stations because their fuel will be replenished more and fresher than a gas station not frequented as much.

Replace your fuel filters every 50-100 hours, and more often if you suspect you might be getting unlabeled ethanol fuels from your local station.

Avoid running your tanks when they get close to empty. If you have had phase separation, the bottom of the tank will hold the highest water content.  You may be able to run the tanks low enough and then remove the bad fuel and discard properly. Check your state laws on rules governing this.

Final Thoughts

“I was plagued with issues that resulted from the effects of ethanol,” Baggett said. “The relationship with ethanol and me was quite volatile and it crippled me more than once this season. It’s been extremely humbling and costly.”

“Ethanol is the No. 1 reason we see in our shop for a blown powerhead,” Sampley said. “If left to do its dirty work, ethanol will make any and all rubber lines useless and cause plastic filters to swell and break. Just avoiding some of the common sense things can alleviate a lot of problems.  Things like leaving if you see a station being filled by a gas tanker. That old fuel and water separation is being stirred up as new fuel is pumped into the holding tanks.”

Ethanol is here to stay. Anglers and boaters need to be cautious and aware of the impacts to outboards and fuel systems in vessels that spend their lives around the water. Take some extra precautions up front to avoid costly repairs and downtime on the water later.

Beyond that anglers and boaters should support efforts to reform the fuel decisions being made in congress. Check out smarterfuelfuture.org to stay up to date on ethanol issues and more. Also contact your congress representatives and share your insight and opinions on ethanol fuels and the damage and costs to boaters and anglers equipment.

Where’s 0R10N?: Local Man Finds Following in the Midst of Pandemic

The Covid-19 pandemic has given people time to remodel homes, learn new cooking techniques, and to build a filtered TV mask. Yes, that’s correct. A working, and filtered mask from the shell of a vintage ORION television set (not a flat screen).

Adam Spain of Mansfield, an avid gamer took quick note that the conventional face mask that is now required to enter certain places of business wouldn’t work for his situation. His beard inhibited the face mask to work as designed.

Spain had an idea to make a mask that met his needs, and paralleled his sense of humor. This idea has grown into somewhat of a cult following in and around Sebastian County and now, more specifically, online.

The end product stemmed from a childhood memory of an anime character who had a TV screen head. Spain went to work removing the guts from the TV leaving a shell. He then replaced the glass with tinted plexiglass.

Once done, fogging and humidity was an issue. Spain added a CPU fan powered by a USB battery source with a Filtrete 1500 filter modified to fit, and plenty of foam for comfort. Sounds easy, right?

After many small revisions, Spain’s creation was a working face mask that serves a real purpose, as well as a novelty to give people a smile.

Public response? Spain admitted that he was somewhat worried at first, but people have responded well and have taken to social media posting selfies and following the popular #Wheres0R10N hashtag.

“I figure if everyone is required to wear a mask, I might as well have fun with it”

Detailed video of the build

Where to find more information about 0R10N F1R3R4881T

Where’s 0R10N?: Local Man Finds Following in the Midst of Pandemic

The Covid-19 pandemic has given people time to remodel homes, learn new cooking techniques, and to build a filtered TV mask. Yes, that’s correct. A working, and filtered mask from the shell of a vintage ORION television set (not a flat screen).

Adam Spain of Mansfield, an avid gamer took quick note that the conventional face mask that is now required to enter certain places of business wouldn’t work for his situation. His beard inhibited the face mask to work as designed.

Spain had an idea to make a mask that met his needs, and paralleled his sense of humor. This idea has grown into somewhat of a cult following in and around Sebastian County and now, more specifically, online.

The end product stemmed from a childhood memory of an anime character who had a TV screen head. Spain went to work removing the guts from the TV leaving a shell. He then replaced the glass with tinted plexiglass.

Once done, fogging and humidity was an issue. Spain added a CPU fan powered by a USB battery source with a Filtrete 1500 filter modified to fit, and plenty of foam for comfort. Sounds easy, right?

After many small revisions, Spain’s creation was a working face mask that serves a real purpose, as well as a novelty to give people a smile.

Public response? Spain admitted that he was somewhat worried at first, but people have responded well and have taken to social media posting selfies and following the popular #Wheres0R10N hashtag.

“I figure if everyone is required to wear a mask, I might as well have fun with it”

Detailed video of the build
Where to find more information about 0R10N F1R3R4881T

Police Reports: 7/5

7/10
On July 10 at 8:30 a.m., a Greenwood officer was dispatched to Walmart in reference to a shop lifter. After arriving on scene, the officer spoke with an asset protection associate, who stated that the suspect, Rochelle White, had skipped scanning merchandise at the register and then proceeded to exit the door without paying. There were several items that the suspect failed to scan totaling $47.19. White, of Huntington, was placed under arrest and banned from the property. She was transported to the SCADC without incident.

7/10
On July 10 at approximately 12:15 p.m. a Greenwood officer was on patrol on AR Highway 10 when he ran a tag on a vehicle that turned into the Westwood Apartments. The registered owner, Sommer Long of Hackett, had a possible warrant. The officer made contact with the three individuals at the apartment complex and asked for their identification. The officer ran Sommer Long through dispatch and was advised that she had a confirmed warrant out of Fort Smith for contempt-failure to pay. Dispatch also advised that a passenger, Brian Long of Magazine, had a warrant out of Minnesota for burglary, but was outside extradition. The driver of the vehicle had a suspended license, but no warrants. The officer was given permission to search the vehicle. During that search, the officer located a black bag in the backseat and a glass pipe. Brian Long stated that it was his. The officer placed both Brian Long and Sommer Long under arrest and transported them to the SCADC without incident.

7/12
On July 12 at approximately 8:40 p.m., a Greenwood officer was running vehicle license plates just west of West Denver Street on State Highway 10 Spur. He ran the tag of a white Ford van traveling east, and the license plate came back stolen from Fort Smith. The officer initiated a traffic stop, and made contact with the driver, Justin Williams of Greenwood. After advising Williams of the reason for the stop, Williams stated that he had purchased the vehicle approximately one month ago. The officer asked for a bill of sale but Williams was unable to provide one. Dispatch also confirmed that Williams had a confirmed warrant out of Greenwood for failure to appear. Williams was placed under arrest for theft by receiving and on the outstanding warrant. He was then transported to the SCADC, where two other warrants were found, one was failure to pay fine $645.00
L/S, and the other was failure to comply with court order seven days jail time.


How to Prevent Water Damage in Your Attic

When most people think of water damage, they might not consider the attic as a problem spot. However, with its proximity to the elements, the attic can be a major source of water damage. This is a headache in and of itself, but it can lead to even more severe problems such as household mold and expensive repairs. Fortunately, you can keep an eye out for these issues and stop them before they cause serious damage. Learn more about how to prevent water damage in your attic with these tips.

Take Care of Your Roof

A leaky roof is one of the most common sources of attic water damage. Make a habit of regularly checking your roof for damage. Pay close attention to split shingles or worn flashing, and check inside your attic for any damaged wood or insulation. You can also prevent roof damage by cleaning off any debris and keeping your gutters and downspouts clear. It’s also a good idea to hire a professional inspector or contractor to identify and fix any major issues you might’ve missed.

Create Proper Ventilation

If you’re wondering how to prevent water damage in your attic, keep in mind that even seemingly minor issues—such as humidity—can cause problems. Excess humidity can lead to condensation buildup and eventual water damage, which is why ventilating your attic is important. Proper ventilation helps the moisture in your attic escape, so check your vents to make sure they’re clear and not blocked by insulation. Additionally, make sure your household appliances vent to the outside of your house instead of into the attic.

Maintain Appliances

When you’re looking for water damage in your attic, make sure to check around your appliances. Air conditioners, HVAC systems, and other appliances might break or leak, causing major issues. Pay attention to pipes and connections, and keep a close eye on old or worn equipment. Keep up with regular maintenance of these appliances, especially if they’re known to leak water or moisture.

Obituary- James Richmond (1939-2020)

James Ronald Richmond of Ft. Smith, Arkansas, formerly of Waldron, Arkansas went to be with his Lord and Savior, Saturday, July 11, 2020, in Ft. Smith, Arkansas with his family by his side. James was born June 17, 1939, to Earl Richmond and Susie (House) Richmond. James was 81 years old. He attended Temple Baptist Church.

James was born in a log house in the Greenridge community eight miles East of Waldron. He started school in a one room school house at Cardiff, Arkansas and finished high school at Waldron High School in 1957. He met his loving wife and later they married in 1959. He was drafted in to the US Army in December 1961. James was discharged in December 1963 at Ft. Bliss, Texas and returned to Waldron, Arkansas with a new daughter, Sabra Diane. He was employed by Sim’s Building Materials in March 1964 to July 1969 when he opened a new business in August 1969. He was co-owner of City Furniture Mart for 22 years. He sold out and retired in August 1991. James enjoyed hunting, fishing, golf and most of all he loved bluegrass music festivals and jamming with friends and playing the Dobro guitar.

James leaves behind to cherish his memory, his loving wife of 61 years, Lottie of the home, one daughter, Sabra Roberson and husband Denis of Ft. Smith, Arkansas. Grandpa James will forever remain in the hearts of his grandchildren: Kyle Redding, Dallas Roberson and wife BJ and Austin Roberson, as well as great grandchildren, Anna, Jace and Ransom. James will be missed by all that knew him and the many whose lives he impacted, including his beloved dog Bo, a host of extended family, friends and loved one’s dear to his heart.

James’ celebration of life will be 12:00 p.m., Tuesday, July 14, 2020, at the Heritage Memorial Funeral Home Chapel in Waldron, Arkansas with Rev. Jackie Smith officiating. Interment will follow in the Mt. Pleasant Cemetery in the Greenridge Community. Arrangements are being entrusted to the Heritage Memorial Funeral Home in Waldron, Arkansas.

James was preceded in death by his parents, Earl and Susie Richmond, and siblings, Jerry Richmond, JoAnn Morrison and Johnny Richmond.

James’ pallbearers will be Larry Shores, Curtis Billings, A.G. Morrison, Rick Bice, Anthony Morrison and Tyler Wagner. Honorary pallbearers will be David Tucker, Bud Fuller, Fred Mourton, and Bob Shores.

James’ visitation will be Tuesday, July 14, 2020, from 10:00 a.m. until 12:00 p.m. at the Heritage Memorial Funeral Home in Waldron, Arkansas.

You may leave words of remembrance for James’ family by visiting: www.heritagememorialfh.com.

Weekly Arrest Reports 7/5

Ashley Anne Fore of Mansfield was booked into the Sebastian County Detention Center on July 5 at 11:56 p.m., and was released on bond July 6 at 1:31 a.m. Fore was charged with failure to appear, a class B misdemeanor and contempt – willful disobedience (failure to pay fine.)

Charlsey Jean Kellar of Hackett was booked into the Sebastian County Detention Center on July 9 at 10:47 a.m. and was released on bond July 9 at 2:25 p.m. Keller was charged with failure to appear, a class B misdemeanor.

Jakob Jynx Kossman of Huntington was booked into the Sebastian County Detention Center on July 8 at 7:02 p.m. and was released on bond July 8 at 9:31 p.m. Kossman was charged with contempt – willful disobedience (failure to pay fine.)

Jo Beth Kossman of Huntington was booked into the Sebastian County Detention Center on July 8 at 7:04 p.m. and was released on bond July 8 at 10:31 p.m. Kossman was charged with contempt – willful disobedience (failure to pay fine.)

Erik Robert Sonny Ruiz of Mansfield was booked into the Sebastian County Detention Center on July 8 at 8:41 p.m. and was released on bond July 8 at 11:27 p.m. Ruiz was charged with failure to appear, a class B misdemeanor.

Tre’sure Kristen Sylva of Mansfield was booked into the Sebastian County Detention Center on July 10 at 12:35 p.m. and remains in the SCADC. Sylva was charged with absconding, violating parole, tampering with physical evidence, possession of schedule I/II controlled substance with the purpose to deliver, and possession of drug paraphernalia.

Jason Warren Waters of Mansfield was booked into the Sebastian County Detention Center on July 7 at 4:38 a.m. and remains in the SCADC. Waters was charged with aggravated assault on a family or household member, aggravated assault on a family or household member – choke, endangering the welfare of a minor in the first degree – conduct, and interfering with emergency communications – first degree misdemeanor.

Rochelle Leanne White of Huntington was booked into the Sebastian County Detention Center on July 10 at 9:25 a.m. and was released on bond July 10 at 12:01 p.m. White was charged with theft of property, less than $1,000.

**The charges against those arrested are allegations and the cases are still pending in the courts.**

RVPCS Opens Clinic in Bonanza

River Valley Primary Care Services, which has 10 clinics across the River Valley, has opened in Bonanza.

The Bonanza Wellness Center, located at 920 S. Hwy. 45, is open and now accepting patients ages six weeks and older. The health provider is Greenwood native Brittney Beland-Jackson, Nurse Practitioner.

Patients are seen by appointment, Monday through Friday 8 a.m.-4:30 p.m. The clinic offers in house lab services, flu screening and COVID-19 testing. Additionally, they accept most insurances, including Medicaid.

“We accept patients with or without insurance, and offer a sliding scale pay option, ranging from $20 to full pay,” stated Site Coordinator Sierra Reynolds. RVPCS offers affordable healthcare to those with insurance, those without, and those that are underinsured without regard of their ability to pay.

RVPCS in Bonanza is expecting to expand their clinic by adding four more exam rooms in the future.

If you are interested in learning more about RVPCS, you can visit their webpage, or Facebook page. You can contact the Bonanza clinic at 479-279-7690.

Brittney Beland-Jackson, Nurse Practitioner

Tax Deadline is Upon Us

Due to COVID-19, the delayed deadline to file state and federal taxes is quickly approaching. Arkansans who have not filed to pay their taxes still have until July 15.

“This year, the date might have changed, but the responsibility remains – tax time has arrived,” said Attorney General Leslie Rutledge. “Our communities have dealt with many difficult situations for a majority of the year when it comes to making ends meet and I want Arkansans to know their options and filing your taxes shouldn’t be a burden.”

Taxpayers have the ability to file and pay their taxes safely online through IRS.gov in order to avoid the backlog of mail that may have developed due to previous closures in response to the pandemic. The Internal Revenue Service (IRS) offers taxpayers their Interactive Tax Assistant (ITA) system as a resource to learn more and answer frequently asked questions while filing taxes online.

Attorney General Rutledge has provided these tips for Arkansans still working on filing their federal and state taxes this year:

  • Taxpayers who need additional time to file beyond the July 15 deadline can request a filing extension to October 15, but this must be done by July 15. Then they must file Form 4868 through their tax professional, tax software, or using the Free File link on IRS.gov.
  • Arkansas taxpayers who still owe 2019 income tax, as well as estimated tax for 2020, must make two separate payments on or before July 15, 2020; One for their 2019 income tax owed and one for their 2020 estimated tax payments.
  • Members of the military qualify for an additional extension of at least 180 days to file and pay taxes if either of the following situations apply: they serve in a combat zone, have qualifying service outside a combat zone, or they serve on deployment outside the United States away from their permanent duty station while participating in a contingency operation.
  • AARP Foundation Tax Aide program offers free assistance to Arkansas seniors filing their taxes online or by calling 888-OUR-AARP (888-687-2277).
  • Tax help is available 24 hours a day and 7 days a week on IRS.gov.
  • Information for filing state taxes can be found online on dfa.arkansas.gov/income-tax or by calling (501) 682-1100

For more information and tips to avoid scams and other consumer-related issues, contact the Arkansas Attorney General’s Office at (800) 482-8982 or OAG@ArkansasAG.gov or visit ArkansasAG.gov or Facebook.com/AGLeslieRutledge.

Mini Smore Pies

Recently, the kids wanted to build a campfire and make smores outside, but I didn’t have any firewood.  Plus, it has just been too hot for a fire.  I would much rather make a campfire on a chilly October evening anyways.  So, I decided I would improvise and make the kids mini smore pies.  The kids absolutely loved them, and even asked the next night for the pies again.  These were so easy and fast to assemble too.  However, the best thing about this, there is literally no dishes to wash after making this dessert!  Life can’t get any better than that.  No dishes and chocolate goodness!

Ingredients: 

1 Package of Mini Graham Cracker Pie Crusts (6 Count)

1 Package of Full-Size Hershey Chocolate Bars (6 Count)

1 Package of Mini Marshmallows

Directions:

Preheat the oven to 400 degrees.  Place your mini pie crusts on a cookie sheet and fill each pie crust with half chocolate bar (break it up into squares) and top with mini marshmallows. Place smore pies in the oven for 2 minutes.  Turn on your broiler settings and let your marshmallows on top lightly toast for about 1 minutes under the broiler.  Be sure and kept watch.  They could burn very easily if left too long under the strong heat.  Once removed from the heat, they are ready to eat but be careful! They are hot!  Enjoy!